Jul 27, 2024
 
Available in 1.638" (1-5/8" O.D.) & 1.9" (1-7/8" O.D.) by 12 gauge hi-tensile tubing x 42" or 48" high.
AIl gates have 2" x 2" square tubing on hinge end & manufactured to desired length.
STANDARD GATE STANDARD GATE WITH MANPASS
1. CLAMP ON HINGE TO STEEL POST
(Available Sizes 2-7/8" O.D. to 5" O.D.)		 2. HINGE TO WELD TO
STEEL POST		 3. WOOD POST HINGE
4. HINGE PIN - STANDARD THREAD
(2" x 7/8" - 12" CUT THREAD)		 5. DOUBLE GATE LATCH
(Requires supplied pipe nub to be sized
and welded to gate in field)		 6. CHAIN LATCH
3/16" or 1/4"

(HEAVY-DUTY CONSTRUCTION)
 
  1. Hinge end vertical to be 2" x 2" x 11 gauge (capped) 'Gatorshield' pre-galvanized hi-tensile tubing (minimum 50,000 PSI yield and tensile strength).
  2. All remaining horizontal and vertical material to be 1.9" (1-7/8" O.D.) x 12 gauge 'Gatorshield' *pre-galvanized hi-tensile tubing (minimum 50,000 PSI yield and tensile strength). Also available - 1.638" (1-5/8" O.D.) x 12 gauge.
  3. All gates to be manufactured with rounded form on top swing end for animal safety.
  4. All ends at weld points to be pre-notched to fit profile of joined piece for full 360-degree weld.
  5. All weld joints to be treated with hi-quality rustproof zinc coating. (Longer lasting than cold galvanizing application).
  6. All gates manufactured in terms of height and length to customer specification.
  7. All gates to have heavy-duty hinges provided. (Weld, bolt, or clamp-on).
  8. Latching choices optional (double latch, chain).